Faculty of Engineering & Technology

Filter
Conference contribution

Search results

  • 2012

    Termite-hill: Routing towards a mobile sink for improving network lifetime in Wireless Sensor Networks

    Zungeru, A. M., Ang, L. M. & Seng, K. P., 2012, Proceedings - 3rd International Conference on Intelligent Systems Modelling and Simulation, ISMS 2012. p. 622-627 6 p. 6169774. (Proceedings - 3rd International Conference on Intelligent Systems Modelling and Simulation, ISMS 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    15 Citations (Scopus)

  • The development and application of incremental sheet forming in bio-medical industries

    Oladele, S. K. & Samuel, A. A., 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. p. 1540-1547 8 p. (Materials Science and Technology Conference and Exhibition 2012, MS and T 2012; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • The dynamics of plug zones in elasto-plastic flows in unsteady flow in circular tubes

    Letelier, M. F., Siginer, D. A., Ahumada, J. L. & Stockle, J. S., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, C, D ed. p. 1023-1028 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7, no. PARTS A, B, C, D).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • The effect of valve control on a motor vehicle engine performance

    Zibani, I., Chuma, J. & Marumo, R. R., 2012, Proceedings of the IASTED African Conference on Modelling and Simulation, AfricaMS 2012. p. 140-147 8 p. (Proceedings of the IASTED African Conference on Modelling and Simulation, AfricaMS 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Tracking design elements in a mechanical engineering curriculum

    Oladiran, M. T., Uziak, J. & Kommula, V. P., 2012, Advances in Materials and Systems Technologies III. p. 601-610 10 p. (Advanced Materials Research; vol. 367).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Water the Elixir of Life: Quotes from Veds and Purans

    Verma, R., Apr 12 2012, National Seminar on Environment, Biodiversity and Traditional Knowledge System: Dept. of Zoology, Mizoram University & Maharshi Sandipani Rastriya Ved Vidya Sansthan, India.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
    File
    565 Downloads (Pure)
  • 2011

    2D matrix array optimization by simulated annealing for 3D hepatic imaging

    Diarra, B., Liebgott, H., Tortoli, P. & Cachard, C., 2011, 2011 IEEE International Ultrasonics Symposium, IUS 2011. p. 1595-1598 4 p. 6293075. (IEEE International Ultrasonics Symposium, IUS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    7 Citations (Scopus)

  • Analysis of plug zones in steady flow in undulating channels

    Letelier, M. F., Svensson, P., Siginer, D. A. & Stockle, J. S., 2011, Fluids and Thermal Systems; Advances for Process Industries. PARTS A AND B ed. American Society of Mechanical Engineers (ASME), p. 217-222 6 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 6, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • A new interconnection structure method for QC-LDPC codes

    Ghani, F., Yahya, A., Kader, M. A. & Islam, M. A., 2011, 2011 International Conference on Multimedia, Signal Processing and Communication Technologies, IMPACT 2011. p. 114-117 4 p. 6150451. (2011 International Conference on Multimedia, Signal Processing and Communication Technologies, IMPACT 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ant based routing protocol for visual sensors

    Zungeru, A. M., Ang, L. M., Prabaharan, S. R. S. & Seng, K. P., 2011, Informatics Engineering and Information Science - International Conference, ICIEIS 2011, Proceedings. PART 2 ed. p. 250-264 15 p. (Communications in Computer and Information Science; vol. 252 CCIS, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    16 Citations (Scopus)

  • Application of Mathematics as a tool in Petrology and Geochemistry

    Verma, R., Nov 24 2011, National Conference on Mathematical Science: Dept. of Mathematics, PUC, Mizoram University, Aizawl, India.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
    File
    58 Downloads (Pure)

  • Conduit flow control through magnetorheology

    Letelier, M. F., Stockle, J. S. & Siginer, D. A., 2011, Fluids and Thermal Systems; Advances for Process Industries. PARTS A AND B ed. American Society of Mechanical Engineers (ASME), p. 211-216 6 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 6, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Drainage System of Tlawng River, Mizoram: Linkage with Barak- Meghna- Brahmputra System

    Verma, R., Sept 24 2011, Case Studies of Real Time Hydrological Modeling for Ganga- Brahmputra Basin: Dept. of Civil Eng., National Institute of Technology, Rourkela, India.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
    File
    43 Downloads (Pure)

  • Economic optimization of a thermal cracker via model predictive control technology

    Savu, A. R., Muntean, I., Lazea, G. & Agachi, P. S., 2011, 2011 19th Mediterranean Conference on Control and Automation, MED 2011. p. 819-824 6 p. 5983153. (2011 19th Mediterranean Conference on Control and Automation, MED 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • Geoenvironmental Challenges in the Indo-Myanmar Kaladon Multi Modal Transit Transport Project

    Verma, R., Nov 16 2011, Advances in Environmental Chemistry: Depttt. of Chemistry, Mizoram University, Aizawl, India.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
    File
    20 Downloads (Pure)

  • Graetz problem in ducts of circular and some non-circular cross-sections with viscoelastic fluids

    Abdelkader, F., Khezzar, L., Siginer, D. A. & Nemouchi, Z., 2011, Fluids and Thermal Systems; Advances for Process Industries. PARTS A AND B ed. American Society of Mechanical Engineers (ASME), p. 149-154 6 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 6, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Logistics tracking: An implementation issue for delivery network

    Shamsuzzoha, A., Addo-Tenkorang, R., Phuong, D. & Helo, P., 2011, PICMET'11 - Portland International Center for Management of Engineering and Technology, Proceedings - Technology Management in the Energy-Smart World. 6017949. (PICMET: Portland International Center for Management of Engineering and Technology, Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Citations (Scopus)

  • Measurement study on the end-to-end data transmission in motorways surveillance system using Wireless Ad Hoc Camera Networks (WAHCN)

    Hassnawi, L. A., Ahmad, R. B., Yahya, A., Elshaikh, M., Al-Rawi, A. A. A., Ali, Z. G. & Aljunid, S. A., 2011, Proceedings - 2nd International Conference on Engineering and Industries, ICEI 2011. p. 26-30 5 p. 6218522. (Proceedings - 2nd International Conference on Engineering and Industries, ICEI 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Microstructure and wear behaviour of Al/TiB2 metal matrix composite

    Popoola, A. P., Pityana, S. & Ogunmuyiwa, E., 2011, Laser and Plasma Applications in Materials Science, LAPAMS 2010. p. 23-26 4 p. (Advanced Materials Research; vol. 227).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    10 Citations (Scopus)

  • New QC-LDPC codes implementation on FPGA platform in Rayleigh fading environment

    Ghani, F., Yahya, A. & Kader, A., 2011, ISCI 2011 - 2011 IEEE Symposium on Computers and Informatics. p. 206-210 5 p. 5958912. (ISCI 2011 - 2011 IEEE Symposium on Computers and Informatics).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Open pit geometry modeling and economic analysis of novel at-face-slurry options

    Suglo, R. S., Frimpong, S. & Brown, O. F., 2011, SME Annual Meeting and Exhibit and CMA 113th National Western Mining Conference 2011. p. 520-524 5 p. (SME Annual Meeting and Exhibit and CMA 113th National Western Mining Conference 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Operational costs reduction for the WWTP by means of substrate to dissolved oxygen correlation, a simulation study

    Ostace, G. S., Gal, A., Cristea, V. M. & Agachi, P. S., 2011, Proceedings of the World Congress on Engineering and Computer Science 2011. Newswood Limited, Vol. 2. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access

  • Performance analysis of cooperative wireless communication system with diversity scheme

    Hanah, A., Ghani, F., Norazura, Yahya, A., Ahmad, R. B., Norlydiana, Hafiizh, A., Ehkan, P. & Faiz, F., 2011, 2011 International Conference on Multimedia, Signal Processing and Communication Technologies, IMPACT 2011. p. 118-121 4 p. 6150452. (2011 International Conference on Multimedia, Signal Processing and Communication Technologies, IMPACT 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • Removal and recovery of Ni, Cu and Fe from heavy metal effluent by reduction crystallization

    Phetla, T. P., Ntuli, F. & Muzenda, E., 2011, Water Resources Management VI. WITPress, Vol. 145. p. 681-690 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
    1 Citation (Scopus)

  • River Systems of Mizoram; Potential Water Way Transport Resource

    Verma, R., Sept 12 2011, Climate Change and Earth’s Sustainability: Issues and challenges: Society of Earth Scientists, University of Lucknow, India.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
    File
    30 Downloads (Pure)

  • River Systems of Mizoram: Potential Avenue in the Multi Modal Transport System in the Region

    Verma, R., Jan 28 2011, WATERCON-2011: PFI Foundation/Deptt. of Computer Science, Guwahati University. p. 1 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
    File
    302 Downloads (Pure)

  • Sliding mode simulation and robustaness controller

    Ahmed, A. A., Ahmad, R. B., Alobaidi, S. A., Yahya, A., Hassnawi, L. A., Ali, Z. G. & Tahir, H. H., 2011, Proceedings - 2nd International Conference on Engineering and Industries, ICEI 2011. p. 91-96 6 p. 6218534. (Proceedings - 2nd International Conference on Engineering and Industries, ICEI 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Towards smart wireless sensor actor networks: Design factors and applications

    Sabri, N., Aljunid, S. A., Ahmad, R. B., Malik, M. F., Yahya, A., Kamaruddin, R. & Salim, M. S., 2011, 2011 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2011. p. 704-708 5 p. 6108808. (2011 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    8 Citations (Scopus)

  • Western Canadian coal production optimization and risks characterization

    Frimpong, S., Suglo, R. S. & Adadzie, E., 2011, SME Annual Meeting and Exhibit and CMA 113th National Western Mining Conference 2011. p. 525-531 7 p. (SME Annual Meeting and Exhibit and CMA 113th National Western Mining Conference 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Wireless sensor actor networks

    Sabri, N., Aljunid, S. A., Ahmad, R. B., Malik, M. F., Yahya, A., Kamaruddin, R. & Salim, M. S., 2011, ISWTA 2011 - 2011 IEEE Symposium on Wireless Technology and Applications. p. 90-95 6 p. 6089387. (ISWTA 2011 - 2011 IEEE Symposium on Wireless Technology and Applications).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    7 Citations (Scopus)
  • 2010

    Assessment of solar-coal hybrid electricity power generating systems

    Oladiran, M. T., Kiravu, C. & Plumb, O. A., 2010, Proceedings of the 3rd IASTED African Conference on Power and Energy Systems, AfricaPES 2010. ACTA Press, p. 74-82 9 p. (Series on Energy and Power Systems).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Complex pressure pulses in micro-channels magnetically induced

    Leteller, M. F., Stockle, J. S., Siginer, D. A. & Ulloa, F. A., 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), p. 81-90 10 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 9, no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Effect of substrates on the microstructure of thermally sprayed WC-4.88 wt% Co coatings

    Oladijo, O. P., Venter, A. M., Cornish, L. A., Sacks, N. & Shrivastava, S., 2010, Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010. European Powder Metallurgy Association (EPMA), (Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Energy attenuation capability of woven natural silk (WNS)/epoxy composites plates subjected to drop-weight impacts

    Ude, A. U., Sopian, K. & Azhari, C. H., 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. p. 115-122 8 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Flow instabilities and heat transfer in buoyancy driven flows of inelastic non-Newtonian fluids in inclined rectangular cavities

    Siginer, D. & Khezzar, L., 2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. PARTS A, B AND C ed. p. 1411-1420 10 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1, no. PARTS A, B AND C).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Heat transfer asymptote in laminar tube flows of non-linear viscoelastic fluids

    Siginer, D. A., 2010, 2010 14th International Heat Transfer Conference, IHTC 14. p. 839-852 14 p. (2010 14th International Heat Transfer Conference, IHTC 14; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Heat transfer enhancement in corrugated pipes

    Siginer, D. A. & Akyildiz, F. T., 2010, 2010 14th International Heat Transfer Conference, IHTC 14. p. 853-860 8 p. (2010 14th International Heat Transfer Conference, IHTC 14; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Landslide hazard in Aizawl Township, Mizoram, India

    Verma, R., Jun 6 2010, National Workshop on Landslide and Environmental Degradation in Hilly Terrain: L.S.M. Govt. P.G. College, Pithoragarh, Uttaranchal, India.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
    File
    13 Downloads (Pure)

  • Magnitudes of coupling coefficients of horizontal and vertical slots in a dual mode filter

    Pholele, T. M. & Chuma, J. M., 2010, Proceedings of the 3rd IASTED African Conference on Modelling and Simulation, AfricaMS 2010. ACTA Press, p. 1-4 4 p. (Proceedings of the 3rd IASTED African Conference on Modelling and Simulation, AfricaMS 2010).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Modelling and control of an anfis temperature controller for plastic extrusion process

    Ravi, S. & Balakrishnan, P. A., 2010, 2010 IEEE International Conference on Communication Control and Computing Technologies, ICCCCT 2010. p. 314-320 7 p. 5670572. (2010 IEEE International Conference on Communication Control and Computing Technologies, ICCCCT 2010).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    17 Citations (Scopus)

  • Natural convection with non-Newtonian shear-thinning power law fluids in inclined two dimensional rectangular cavities

    Khezzar, L. & Siginer, D., 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), p. 141-145 5 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 9, no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Plastic flow establishment in circular pipes under the effect of a magnetic field

    Stockle, J. S., Letelier, M. F., Siginer, D. A. & Maria, J. A., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. PARTS A AND B ed. p. 627-633 7 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Vartm process improvement for repeatable and improved mechanical properties of composite laminates

    Sharma, S. & Siginer, D. A., 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), p. 45-50 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 9, no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2009

    Academic research management by means of an integrated software system

    Andreica, A. B. & Agachi, P. S., 2009, Proceedings of the IADIS International Conference Informatics 2009, Part of the IADIS Multi Conference on Computer Science and Information Systems, MCCSIS 2009. p. 150-154 5 p. (Proceedings of the IADIS International Conference Informatics 2009, Part of the IADIS Multi Conference on Computer Science and Information Systems, MCCSIS 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • A Critical Evaluation of Landslide Problems in Aizawl Township, Mizoram.

    Verma, R., Jan 5 2009, 96th Indian Since Congress: North Eastern Hill University, Shillong, India.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    Open Access
    File
    21 Downloads (Pure)

  • An acoustical method of predicting permeability of orthotropic fibers

    Sharma, S. & Siginer, D. A., 2009, 24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites. p. 903-908 6 p. (24th Annual Technical Conference of the American Society for Composites 2009 and 1st Joint Canadian-American Technical Conference on Composites; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • A new Quasi-Cyclic low density parity check codes

    Yahya, A., Sidek, O., Salleh, M. F. M. & Ghani, F., Dec 16 2009, 2009 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2009 - Proceedings. p. 239-242 4 p. 5356472. (2009 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2009 - Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    6 Citations (Scopus)

  • An inverse approach to magnetorheological damper design: Hershel-Bulkley model

    Letelier, M. F., Stockle, J. S. & Siginer, D. A., 2009, 2008 Proceedings of the ASME Fluids Engineering Division Summer Conference, FEDSM 2008. PART A ed. p. 201-206 6 p. (2008 Proceedings of the ASME Fluids Engineering Division Summer Conference, FEDSM 2008; vol. 1, no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • CFD simulation of the portal vein blood flow

    Botar, C. C., Vasile, T., Sfrangeu, S., Clichici, S., Agachi, P. S., Badea, R., Mircea, P., Cristea, M. V. & Moldovan, R., 2009, International Conference on Advancements of Medicine and Health Care through Technology. p. 359-362 4 p. (IFMBE Proceedings; vol. 26).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    6 Citations (Scopus)

  • Determination of physical properties of isotropic porous materials by impedance tube

    Sharma, S. & Siginer, D., 2009, Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009. PART B ed. p. 1235-1237 3 p. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009; vol. 1, no. PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution