Mechanical, Energy & Industrial Engineering

2022

Botswana Blood Commons: Visualizing blood services as a public-commons partnership

Sacks, J., Galabo, R. & Nthubu, B., Aug 19 2022, p. 84–93. 10 p.

Research output: Contribution to conference › Paper › peer-review

2020

3D modeling of additive manufacturing process: The case of polymer laser sintering

Zhang, L., Boutaous, M., Xin, S. & Siginer, D. A., 2020. 4 p.

Research output: Contribution to conference › Paper › peer-review

Effect of energy density on the consolidation mechanism and microstructural evolution of laser cladded functionally-graded composite Ti-Al system

Olakanmi, E. O., Sepako, M., Morake, J., Kutua, S., Hoosain, S. E. & Pityana, S. L., 2020, p. 1422-1438. 17 p.

Research output: Contribution to conference › Paper › peer-review

Redesigning a workshop from physical to digital:Principles for designing distributed co-design approaches

Galabo, R., Nthubu, B., Cruickshank, L. & Perez, D., 2020, p. 64 - 70. 7 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

2019

Disruptive Innovation Ecosystems:Reconceptualising Innovation Ecosystems

Nthubu, B., Richards, D. & Cruickshank, L., 2019.

Research output: Contribution to conference › Paper › peer-review

Open Access

2017

Cloud-based Wireless Monitoring System and Control of a Smart Solar-Powered Aquaponics Greenhouse to Promote Sustainable Agriculture and Fishery in an Arid Region

Nagayo, A. M. & Jamisola, R., Jun 12 2017.

Research output: Contribution to conference › Paper › peer-review

Facilitating conceptual understanding and reflective learning ability of undergraduate engineering trainees studying strength of materials via instructional scaffolds

Olakanmi, E. O. & Olakanmi, E. O., 2017.

Research output: Contribution to conference › Paper › peer-review

Heat transfer in laminar flow with elastoviscoplastic fluids in non-circular ducts

Letelier, M. F., Siginer, D. A., Contreras, D., Jacobs, P. & Barrera, C., 2017. 3 p.

Research output: Contribution to conference › Paper › peer-review

Heat Transfer in Laminar Flow with Elastoviscoplastic Fluids in Non-Circular Tubes

Letelier, M. F., Dennis, S., Contreras, D., Jacobs, P. & Barrera, C., 2017.

Research output: Contribution to conference › Paper › peer-review

Heat transfer optimization in laminar flow of non-linear viscoelastic fluids in asymmetric straight ducts with inclusions

Letelier, M. F., Siginer, D. A., Arriagada, G. & Gonzalez, A., 2017.

Research output: Contribution to conference › Paper › peer-review

Model for Developing a Feature Recogntion System for A Reconfigurable Bending Press Machine

Murena, E., Mpofu, K., Trimble, J. & Gwangwava, N., 2017, p. 533-538. 6 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

4 Citations (Scopus)

Natural Convection of Power-Law Fluids in Three Dimensional Tilted Boxes

Dennis, S. & Morrone, B., 2017.

Research output: Contribution to conference › Paper › peer-review

Rheometric Studies of a New Class of Ionic Liquid Nanolubricants

Bakhtiyarov, S. & Dennis, S., 2017.

Research output: Contribution to conference › Paper › peer-review

Rheometric studies of functional polyurethane foam composite

Bakhtiyarov, S. I., Oxley, J. C., Smith, J. L., Baldovi, P. M. & Siginer, D. A., 2017.

Research output: Contribution to conference › Paper › peer-review

1 Citation (Scopus)

Rheometric studies of new class ionic liquid nanolubricants

Bakhtiyarov, S. I. & Siginer, D. A., 2017. 2 p.

Research output: Contribution to conference › Paper › peer-review

Viscoelastic Flow in Teardrop-shaped Tubes: Analysis of Transversal Flow

Letelier, M. F., Dennis, S., Gutiérrez, S., Arratia, P. & González, A., 2017. 4 p.

Research output: Contribution to conference › Paper › peer-review

2016

Case study of failure analysis of engineering components: Effects on employable skills, conceptual understanding, and perception

Olakanmi, E. O., Agboola, J. B., Olakanmi, E. E. & Nthubu, B., 2016.

Research output: Contribution to conference › Paper › peer-review

1 Citation (Scopus)

Changes in the perception of freshman engineering students: team-based problem learning approach in an engineering- design foundation course

Addo-Tenkorang, R., Ogunmuyiwa, E. N., Nthubu, B., Tjiparuro, Z. & Juma, A., 2016.

Research output: Contribution to conference › Paper › peer-review

Open Access

Comparison of fresh and graduate engineering students' design conceptualisation process

Olakanmi, E. O., Addo-Tenkorang, R., Nthubu, B., Oladijo, O. P., Oladiran, M. T. & Katende, J., 2016.

Research output: Contribution to conference › Paper › peer-review

Open Access

1 Citation (Scopus)

Effect of elasticity on viscoplastic flow

Letelier, M. F., Díaz, N., Siginer, D. & Báez, E., 2016.

Research output: Contribution to conference › Paper › peer-review

Herschel-bulkley viscoplastic flow in tubes of non-circular cross-section

Letelier, M. F., Siginer, D. A., Godoy, F. & Rosas, C., 2016.

Research output: Contribution to conference › Paper › peer-review

2 Citations (Scopus)

The Effect of Gas Evolution on Hydraulic Characteristics of Fluid Flow in Pipeline

Panakhov, G. M., Abbasov, E. M., Bakhtiyarov, S. & Dennis, S., 2016. 3 p.

Research output: Contribution to conference › Paper › peer-review

The effect of gas evolution on hydrodynamic characteristics of fluid flow in pipeline

Panakhov, G. M., Bakhtiyarov, S. I., Abbasov, E. M. & Siginer, D. A., 2016.

Research output: Contribution to conference › Paper › peer-review

Thermometric studies of newly developed nanolubricants

Bakhtiyarov, S. I., Kutelia, E. R. & Siginer, D. A., 2016.

Research output: Contribution to conference › Paper › peer-review

1 Citation (Scopus)

Understanding the crystallization of PLA effects of temperature and shearing conditions

Boutaous, M., Refaa, Z., Xin, S. & Siginer, D. A., 2016. 3 p.

Research output: Contribution to conference › Paper › peer-review

Viscoelastic flow in teardrop - Shaped tubes: Transversal field

Letelier, M. F., Siginer, D. A., Gutiérrez, S., Arratia, P. & González, A., 2016.

Research output: Contribution to conference › Paper › peer-review

2015

A Survey On Management of Upstream Land Use as a Direct Input to Energy Requirements in Water Purification Processes

Patella, W., Jamisola, R. & Letswenyo, M. W., 2015.

Research output: Contribution to conference › Paper › peer-review

Open Access

Continuous-type liquid Level Measurement System using pulsating sensor

Praveen, K., Rajniganth, M. P., Arun, A. D., Sahoo, P. & Murali, N., 2015, p. 479-483. 5 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

5 Citations (Scopus)

Design and Development of FPGA and FPAA Based Remote Terminal Units for Nuclear Power Plants

Gour, A., Sanga, R., Behera, R. P., Sahoo, P., Murali, N. & Satyamurty, S., 2015, p. 44-48. 5 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

2 Citations (Scopus)

Energy Requirements in Cryptographic Mechanisms for Secure Wireless Sensor Networks: An Overview

Pule, M., Jamisola, R. & Ibikunle, F., 2015.

Research output: Contribution to conference › Paper › peer-review

Open Access

Enhancement of Functional Properties of Cotton by Conventional Dyeing with Tio2 Nanoparticles: Materials Today: Proceedings

Khandual, A., Luximon, A., Sachdeva, A., Rout, N. & Sahoo, P. K., 2015, p. 3674-3683. 10 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

9 Citations (Scopus)

Experimental investigations on hybrid solid desiccant - Vapor compression air-conditioning system for Indian climate

Jani, D. B., Mishra, M. & Sahoo, P. K., 2015, p. 3041-3049. 9 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

Numerical simulation of rotary desiccant dehumidifier for hybrid solid desiccant - Vapor compression air-Conditoning system

Jani, D. B., Mishra, M. & Sahoo, P. K., 2015, p. 3103-3110. 8 p.

Research output: Contribution to conference › Paper › peer-review

2014

Velocity field and energy dissipation in viscoplastic flow in tubes of non-circular cross-section

Letelier, M. F., Siginer, D. A. & Godoy, F., 2014.

Research output: Contribution to conference › Paper › peer-review

2 Citations (Scopus)

2013

Exergoeconomic optimisation of a cogeneration system using exergy splitting method

Sahoo, P. K., Wolduamlak, B. & Singh, K. M., 2013.

Research output: Contribution to conference › Paper › peer-review

2 Citations (Scopus)

Towards the design and development of a multinode wireless system for pulsating sensors

Praveen, K., Arun, A. D., Sahoo, P., Murali, N. & Satya Murty, S. A. V., 2013, p. 253-256. 4 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

1 Citation (Scopus)

2012

Potential reduction in CO2 emission and saving in electricity by ground source heat pump system for space heating applications - A study on northern part of India

Sivasakthivel, T., Murugesan, K. & Sahoo, P. K., 2012, p. 970-979. 10 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

20 Citations (Scopus)

2011

A Novel Dynamics Identification Method for Rigid-Body Manipulators

Jamisola, R. & Dadios, E. P., 2011.

Research output: Contribution to conference › Paper › peer-review

Open Access

A Study on the State of Powered-Exoskeleton Design for Lower Extremities

Baldovino, R. G. & Jamisola, R., 2011. 7 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

A Survey on Current Developments in Tactile Sensing Technology for Robotic Surgery and other Biomedical Applications

Nagayo, A. M. & Jamisola, R., 2011.

Research output: Contribution to conference › Paper › peer-review

Interplay of Viscoelasticity and Inertia: Heat Transfer Asymptote in Laminar Tube Flow with Constant Boundary Heat Flux

Dennis, S. & Letelier, M. F., 2011.

Research output: Contribution to conference › Paper › peer-review

2010

Ballooning of pressure tube under LOCA in an Indian pressurised heavy water reactor

Kumar, R., Nandan, G., Sahoo, P. K., Chatterjee, B., Mukhopadhyay, D. & Lele, H. G., 2010, p. 317-323. 7 p.

Research output: Contribution to conference › Paper › peer-review

5 Citations (Scopus)

Flow and Heat Transfer in Wavy Tubes

Dennis, S. & Akyildiz, F. T., 2010.

Research output: Contribution to conference › Paper › peer-review

Heat Transfer with Non-Newtonian Dilatant Power-Law Fluids in Square and Rectangular Cavities

Vinogradov, I., Khezzar, L. & Dennis, S., 2010.

Research output: Contribution to conference › Paper › peer-review

Inelastic and Newtonian Flow Instabilities and Related Heat Transfer in Inclined Boxes

Dennis, S., Vinogradov, I. & Khezzar, L., 2010.

Research output: Contribution to conference › Paper › peer-review

Laminar Flow Model in Ducts of Circular Section With Arbitrary Axial Variation

Letelier, M. F., Siginer, D. A., Stockle, J. S. & Huilcan, A., 2010, p. 619-625. 7 p.

Research output: Contribution to conference › Paper › peer-review

Resonance Modeling and Control in Structures by means of Magnetorheological Dampers

Letelier, M. F., Siginer, D. A., Stockle, J. S. & Herrera, C., 2010, p. 609-618. 10 p.

Research output: Contribution to conference › Paper › peer-review

Solar-driven desiccant and evaporative cooling: Technology overview and operational experiences: Series on Energy and Power Systems

Bader, T., Trinkl, C., Zörner, W. & Hanby, V., 2010, p. 1-8. 8 p.

Research output: Contribution to conference › Paper › peer-review

1 Citation (Scopus)

2009

Friction Law for Bingham Fluid Flow in Channels of Arbitrary Cross-Section Shapes

Letelier, M. F., Stockle, J. S., Siginer, D. A. & Vera, C., 2009, p. 121-127. 7 p.

Research output: Contribution to conference › Paper › peer-review

Full Dynamics Identification and Control of PUMA 560 and Mitsubishi PA-10 Robots

Jamisola, R. & Dadios, E. P., 2009.

Research output: Contribution to conference › Paper › peer-review

Mechanical, Energy & Industrial Engineering

Research output

Search results