Find Research outputs

Search results

• Conference contribution

  Secondary flows in eccentric-annular tubes

  Letelier, M., Siginer, D. A., Almendra, D. L. & Stockle, J., 2019, Fluids Engineering. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Secondary flows in straight non-circular tubes - Giesekus fluid

  Letelier, M. F., Siginer, D. A. & Stockle, J., Jan 1 2013, Fluids Engineering Systems and Technologies. American Society of Mechanical Engineers (ASME), Vol. 7 A.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Secondary Flows of Viscoelastic Fluids in Tubes

  Siginer, D. & Letelier, M. F., 2002, Proceedings: Applied Mechanics in the Americas. American Academy of Mechanics, Vol. 9. p. 261-264 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Secured and robust information hiding scheme

  Abdul-Mahdi, N. H., Yahya, A., Ahmad, R. B. & Al-Qershi, O. M., Jan 1 2013, Malaysian Technical Universities Conference on Engineering and Technology 2012, MUCET 2012. Elsevier Ltd, Vol. 53. p. 463-471 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• Security Aware Virtual Base Station Placement in 5G Cloud Radio Access Networks

  Sigwele, T., Pillai, P., Sangodoyin, A. & Hu, Y. F., 2018, Wireless and Satellite Systems - 9th International Conference, WiSATS 2017, Proceedings. Sithamparanathan, K., Vazquez, M. A., Pillai, P., Giovanni, G. & Mitchell, P. D. (eds.). Springer Verlag, p. 3-10 8 p. (Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST; vol. 231).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Selection and dimensioning model of the anaerobic digester for the sewage sludge digestion to energy

  Matheri, A. N., Ntuli, F., Belaid, M., Seodigeng, T., Ngila, J. C. & Mbohwa, C., 2017, IAENG Transactions on Engineering Sciences: Special Issue for the International Association of Engineers Conferences 2016. Vol. 2.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• SIFT and RANSAC-Based Image Mosaic Algorithm for Image Compression

  Lungisani, B. A., Lebekwe, C. K. & Zungeru, A. M., 2022, 2022 International Conference on Smart Applications, Communications and Networking, SmartNets 2022. Institute of Electrical and Electronics Engineers Inc., (2022 International Conference on Smart Applications, Communications and Networking, SmartNets 2022).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Signature of aromatic carbons in the terahertz spectroscopy of bio-chars

  Lepodise, L. M., Horvat, J. & Lewis, R. A., Dec 1 2013, 2013 38th International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz 2013. 6665653

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Simulating the hydrology and water resources of large basins in southern Africa

  Hughes, D. A., Tshimanga, R. & Tirivarombo, S., 2010, Global Change: Facing Risks and Threats to Water Resources. Vol. 340. p. 591-597 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Simulation of a co-digester plant using aspen plus

  Nduse, R. & Oladiran, T. M., 2016, Proceedings of the 5th IASTED International Conference on Power and Energy Systems, AfricaPES 2016. Acta Press, p. 325-332 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Sintering and heat-treatment of injection moulded 440K-type martensitic stainless steel compacts

  Yousaf Anwar, M., Bhero, S., Messer, P. F. & Davies, H. A., 2008, Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2008. European Powder Metallurgy Association (EPMA), Vol. 2. p. 215-220 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Sizing of an anaerobic biodigester for the organic fraction of municipal solid waste

  Kigozi, R., Aboyade, A. O. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 659-663 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Sliding mode simulation and robustaness controller

  Ahmed, A. A., Ahmad, R. B., Alobaidi, S. A., Yahya, A., Hassnawi, L. A., Ali, Z. G. & Tahir, H. H., Dec 1 2011, Proceedings - 2nd International Conference on Engineering and Industries, ICEI 2011. p. 91-96 6 p. 6218534

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Slope Susceptibility and Instability in Aizawl Township

  Verma, R., Sept 15 2009, National Conference on “Earth System Processes and Disaster Management: Society of Earth Scientists/ National Center of Antarctic & Ocean Research, GOA.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File
  4 Downloads (Pure)

• Small, low cost and high performance filters for mobile telecommunication

  Chuma, J. M., Mirshekar, D., Masupe, S. & Kepaletswe, T., 2004, 2004 IEEE AFRICON: 7th AFRICON Conference in Africa: Technology Innovation. Vol. 2. p. 1011-1013 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Smart start-stop system for a camless engine employing rotary valves

  Zibani, I., Chuma, J. & Marumo, R., 2014, Proceedings of the IASTED International Conference on Modelling and Simulation, AfricaMS 2014. ACTA Press, p. 184-191 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soft information assisted phase noise estimation in vector OFDM using linear MMSE receivers

  Ngebani, I., Li, Y., Xia, X. G., Zhao, M., Chuma, J. & Cai, Y., 2015, Proceedings of 19th International ITG Workshop on Smart Antennas, WSA 2015. Institute of Electrical and Electronics Engineers Inc., 7051827

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soil biochemical properties and plant growth of Platycodongrandiflorium in major plantation area in South Korea

  Rubenecia, M. R. U., Park, J. S., Kim, B. S., Ultra Jr, V. & Lee, S. C., 2013, The Korean society of medical crop science symposium conference. p. 99

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soil chemical and microbial properties affecting root growth of Platycodongrandiflorum

  Rubenecia, M. R. U., Ultra Jr, V. & Lee, S. C., 2014, Improvement of crop productivity in response to climate change. p. 26

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Soil Nutrient Status of Major Ginseng Production Areas in South Korea

  Rubenecia, M. R. U., Seo, P. D., Ultra Jr, V., Park, C. B., Ahn, Y. S. & Lee, S. C., 2013, The Korean society of medical crop science symposium conference. p. 101

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Solar energy for high grade thermal applications in the tropical region

  Oladiran, M. T., 1997, Solar Engineering. Claridge, D. E. & Pacheco, J. E. (eds.). ASME, p. 405-410 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Spheroidisation and oxide disruption phenomena in direct selective laser melting (SLM) of pre-alloyed Al-Mg and Al-Si powders

  Olakanmi, E. O., Cochrane, R. F. & Dalgarno, K. W., Oct 5 2009, TMS 2009 - 138th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 1. p. 371-380 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• SPI-climate change impacts on agricultural droughts

  Tirivarombo, S., 2014, Proceedings of the IASTED International Conference on Environment and Water Resource Management, AfricaEWRM 2014. ACTA Press, p. 51-58 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Stabilisation and solidification of steel industry sludge

  Falayi, T. & Ntuli, F., 2018, HNICEM 2017 - 9th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p. (HNICEM 2017 - 9th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Stability Analysis of Rock Slopes in Aizawl to Lunglei Road Section, District Aizawl, Mizoram India

  Verma, R., Nov 11 2016, National Seminar on Geology, Geochemistry, Tectonics, Energy and Mineral Resources of North East India: Department of Geology, Nagaland University, India.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File
  4 Downloads (Pure)

• Stacked and planar dual-mode filters using dielectric loaded rectangular cavity resonator

  Mirshekar-Syahakal, D., Sim, C. W. & Chuma, J. M., Jan 1 2000, ICMMT 2000 - 2000 2nd International Conference on Microwave and Millimeter Wave Technology. Institute of Electrical and Electronics Engineers Inc., p. 100-103 4 p. 895630

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Steady secondary flows of Phan-Thien-Tanner fluids in the vicinity of a corner

  Letelier, M. F., Acosta, M., Córdova, J. & Siginer, D. A., 2002, Fluids Engineering. American Society of Mechanical Engineers (ASME), p. 291-295 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Structural and mechanical analysis of silane compounds coatings on AISI 304

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P. & Mwema, F., 2019, Mechanics of Solids, Structures, and Fluids. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Structural behaviour of beams under simultaneous load and steel corrosion

  Malumbela, G., Moyo, P. & Alexander, M., 2009, Concrete Repair, Rehabilitation and Retrofitting II - Proceedings of the 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR. p. 253-254 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Students' Capability in Bridging the Entrepreneurial and Innovation Chasm

  Malele, V., Letsoalo, M. E. & Mafu, M., May 13 2021, Proceedings of 2021 IEEE 12th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2021. Institute of Electrical and Electronics Engineers Inc., p. 315-321 7 p. 9476206. (Proceedings of 2021 IEEE 12th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of interactive stresses in thin WC-Co coating of thick mild steel substrate using high-precision neutron diffraction

  Venter, A. M., Luzin, V., Oladijo, O. P., Cornish, L. A. & Sacks, N., 2014, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI. Vol. 772. p. 161-165 5 p. (Materials Science Forum; vol. 772).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Study of NOx reduction in counter-current chromatographic reactor

  Cristian, B. J. C. & Agachi, P. S., Dec 1 2006, 2006 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR. p. 102-106 5 p. 4022828

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of the microstructure and crystal orientation of as-cast Ti-10.2Mo-19.5Nb alloy

  Raganya, L., Moshokoa, N., Obadele, J., Olubambi, P. A. & Machaka, R., Jul 3 2020, Materials Today : Proceedings. Vol. 38. p. 1054-1058 5 p. (Materials Today: Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on the mechanical behavior of excavation and support construction of shallow tunnel

  Yang, Z. X., Song, L., Wang, H., Jiao, Y. Y., Li, S. C., Adoko, A. C. & Zhang, H. Q., 2013, Advances in Civil and Industrial Engineering. Vol. 353-354. p. 1693-1698 6 p. (Applied Mechanics and Materials; vol. 353-354).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Sub-tropical clayey soils-acid mine drainage interactions: A glance at material

  Agbenyeku, E. E. O., Muzenda, E. & Msibi, I. M., Jan 1 2016, WCECS 2016 - World Congress on Engineering and Computer Science 2016. Grundfest, W. S., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2226. p. 630-635 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Suitability of Municipal Solid Waste Transfer Stations in Harare, Zimbabwe

  Nhubu, T., Muzenda, E., Mbohwa, C., Patel, B. & Mateescu, C., Nov 2019, Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 9078181. (Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Surface coating processes: From conventional to silane organic compound applications: recent and prospects

  Baruwa, A. D., Akinlabi, E. T., Oladijo, O. P. & Mwema, F. M., Sept 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer Nature, Singapore, p. 495-502 8 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Surface coating processes: From conventional to the advanced methods; a short review

  Baruwa, A. D., Akinlabi, E. T. & Oladijo, O. P., 2020, Advances in Manufacturing Engineering - Selected Articles from ICMMPE 2019. Emamian, S. S., Yusof, F. & Awang, M. (eds.). Springer Nature, Singapore, p. 483-494 12 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Susceptibility of slope instability in and around Aizawl

  Verma, R., Sept 6 2008, Biodiversity, Environment and Sustainability: Challenges for Future: Swami Shraddhanand College, University of Delhi, India. p. 10 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File
  2 Downloads (Pure)

• Sustainability issues in sputtering deposition technology

  Mwema, F. M., Akinlabi, E. T. & Oladijo, O. P., 2019, 4th North American IEOM Conference. IEOM 2019. IEOM Society, p. 737-744 8 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Sustenance of dark fermentative hydrogen production by an undefined bacterial culture

  Obazu, F. O., Afolabi, A. S., Daramola, M. O. & Gray, V. M., Jan 1 2015, WCE 2015 - World Congress on Engineering 2015. Ao, S. I., Gelman, L., Gelman, L., Hukins, D. W. L., Hunter, A., Korsunsky, A. M., Ao, S. I. & Ao, S. I. (eds.). Newswood Limited, Vol. 2218. p. 951-954 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Synergizing food-energy-water (few) resources for sustainable benefits

  Agbenyeku, E. E. O., Muzenda, E., Msibi, I. M. & Masebinu, S. O., Jan 1 2015, WCECS 2015 - World Congress on Engineering and Computer Science 2015. Douglas, C., Burgstone, J., Grundfest, W. S., Burgstone, J., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, Vol. 2220. p. 632-636 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Synthesis, characterization of gold (III) complexes and an in vitro evaluation of their cytotoxic properties

  Chiririwa, H. & Muzenda, E., 2014, World Congress on Engineering, WCE 2014. Newswood Limited, Vol. 2. p. 637-640 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Synthesis and characterization of new nitrogen donor ligands

  Chiririwa, H. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Douglas, C., Ao, S. I., Ao, S. I., Grundfest, W. S., Burgstone, J., Douglas, C., Burgstone, J. & Ao, S. I. (eds.). Newswood Limited, Vol. 2. p. 624-627 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• System model performance coupled with DPSK modulation over flat rayleigh fading channels

  Sidek, O., Yahya, A. & Salleh, M. F. M., 2009, Proceedings of the 2009 5th Advanced International Conference on Telecommunications, AICT 2009. p. 194-197 4 p. 5072430

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Techno-Econometric Analysis of Membrane Technology for Biogas Upgrading

  Masebinu, S. O., Akinlabi, E. T., Muzenda, E., Mbohwa, C. & Aboyade, A. O., 2015, WCECS 2015: Transactions on Engineering Technologies. Ao, S. I., Kim, H. & Amouzegar, M. (eds.). Springer Singapore, p. 481-497

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Techno-economic feasibility for recovering biogas in a bio augmented municipal sewage plant

  Manyuchi, M. M., Mbohwa, C. & Muzenda, E., 2018, Proceedings of the International Conference on Industrial Engineering and Operations Management, IEOM 2018. IEOM Society, p. 37-44 8 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 2018-March).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Technological Advances and Sustainable Workforce Development through Enhanced Collaboration for Sustainability of Transport Infrastructure

  Zhang, G. & Oladele, A. S., 2020, International Conference on Transportation and Development 2020: Planning and Development - Selected Papers from the International Conference on Transportation and Development 2020. Zhang, G. (ed.). American Society of Civil Engineers (ASCE), p. 277-286 10 p. (International Conference on Transportation and Development 2020: Planning and Development - Selected Papers from the International Conference on Transportation and Development 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Technology selection of biogas digesters for OFMSW via multi-criteria decision analysis

  Kigozi, R., Aboyade, A. O. & Muzenda, E., Jan 1 2014, World Congress on Engineering, WCE 2014. Newswood Limited, Vol. 2. p. 1069-1075 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Technology transfer centre activities for developing transportation engineering professionals-a case of Botswana

  Oladele, A. S., 2014, T and DI Congress 2014: Planes, Trains, and Automobiles - Proceedings of the 2nd Transportation and Development Institute Congress. American Society of Civil Engineers (ASCE), p. 584-591 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution