TY - GEN
T1 - Erosion-wear Behaviour of 304 Stainless Steel Reinforced with TiN at Elevated Temperatures
AU - Mafafo, Ramokone Marcia
AU - Obadele, Babatunde Abiodun
AU - Pilotti, Bruno
AU - Tuckart, Walter Roberto
AU - Olubambi, Peter Apata
N1 - Publisher Copyright:
© 2021, Springer Nature Singapore Pte Ltd.
PY - 2020/8/20
Y1 - 2020/8/20
N2 - The erosion-wear behaviour of spark plasma-sintered austenitic stainless steels matrix composite was investigated under high temperature conditions. Erosion-wear behaviour of the composites was conducted at a constant velocity of 18 m/s and impinging angle of 90° at different temperatures of 25, 400 and 600 °C. Hard abrasive alumina particles with particle size of 40 µm were used as erodent. After SPS, relative density of spark plasma-sintered samples decreased with increasing TiN content. Furthermore, the results show a reduction in material loss with increased hardness. However, there was a significant increase in material wastage as temperature increases. Microstructures of the eroded samples indicate that the erosion damage occurs mainly by plastic deformation and brittle fracture. Large fragments in the form of wear debris, pitting, ploughing with slip on the side, misplaced material and a few grooves are observed as well on the SEM images.
AB - The erosion-wear behaviour of spark plasma-sintered austenitic stainless steels matrix composite was investigated under high temperature conditions. Erosion-wear behaviour of the composites was conducted at a constant velocity of 18 m/s and impinging angle of 90° at different temperatures of 25, 400 and 600 °C. Hard abrasive alumina particles with particle size of 40 µm were used as erodent. After SPS, relative density of spark plasma-sintered samples decreased with increasing TiN content. Furthermore, the results show a reduction in material loss with increased hardness. However, there was a significant increase in material wastage as temperature increases. Microstructures of the eroded samples indicate that the erosion damage occurs mainly by plastic deformation and brittle fracture. Large fragments in the form of wear debris, pitting, ploughing with slip on the side, misplaced material and a few grooves are observed as well on the SEM images.
UR - http://www.scopus.com/inward/record.url?scp=85090519801&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85090519801&partnerID=8YFLogxK
U2 - 10.1007/978-981-15-4745-4_17
DO - 10.1007/978-981-15-4745-4_17
M3 - Conference contribution
AN - SCOPUS:85090519801
SN - 978-981-15-4744-7
T3 - Lecture Notes in Mechanical Engineering
SP - 183
EP - 191
BT - Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019
A2 - Vijayan, S.
A2 - Subramanian, Nachiappan
A2 - Sankaranarayanasamy, K.
PB - Springer Nature, Singapore
T2 - 2nd International Conference on Mechanical Engineering Design, ICMechD 2019
Y2 - 25 April 2019 through 26 April 2019
ER -