Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method

Babatunde Abiodun Obadele; Ramokone Marcia Mafafo; Walter Roberto Tuckart; Peter Apata Olubambi

doi:10.1007/978-981-15-4745-4_61

Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method

Babatunde Abiodun Obadele, Ramokone Marcia Mafafo, Walter Roberto Tuckart, Peter Apata Olubambi

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

The spark plasma sintering (SPS) is a type of electric discharge sintering technique used to consolidate metallic/ceramic powders. In this study, spark plasma sintering was used to fabricate 304 stainless steel with TiN addition. The best parameters that influence the sintering process such as sintering temperature, heating time and pressure were investigated. Results show that by varying the amount of TiN, the sintered properties of the composites could be significantly affected. The relative density decreased with the increment of TiN. Microhardness values vary from 270 to 350 HV0.1.

Original language	English
Title of host publication	Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019
Editors	S. Vijayan, Nachiappan Subramanian, K. Sankaranarayanasamy
Publisher	Springer Nature, Singapore
Pages	681-689
Number of pages	9
ISBN (Electronic)	978-981-15-4745-4
ISBN (Print)	978-981-15-4744-7
DOIs	https://doi.org/10.1007/978-981-15-4745-4_61
Publication status	Published - 2021
Event	2nd International Conference on Mechanical Engineering Design, ICMechD 2019 - Chennai, India Duration: Apr 25 2019 → Apr 26 2019

Publication series

Name	Lecture Notes in Mechanical Engineering
ISSN (Print)	2195-4356
ISSN (Electronic)	2195-4364

Conference

Conference	2nd International Conference on Mechanical Engineering Design, ICMechD 2019
Country/Territory	India
City	Chennai
Period	4/25/19 → 4/26/19

All Science Journal Classification (ASJC) codes

Automotive Engineering
Aerospace Engineering
Mechanical Engineering
Fluid Flow and Transfer Processes

Access to Document

10.1007/978-981-15-4745-4_61

Cite this

Obadele, B. A., Mafafo, R. M., Tuckart, W. R., & Olubambi, P. A. (2021). Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method. In S. Vijayan, N. Subramanian, & K. Sankaranarayanasamy (Eds.), Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019 (pp. 681-689). (Lecture Notes in Mechanical Engineering). Springer Nature, Singapore. https://doi.org/10.1007/978-981-15-4745-4_61

Obadele, Babatunde Abiodun ; Mafafo, Ramokone Marcia ; Tuckart, Walter Roberto et al. / Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method. Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. editor / S. Vijayan ; Nachiappan Subramanian ; K. Sankaranarayanasamy. Springer Nature, Singapore, 2021. pp. 681-689 (Lecture Notes in Mechanical Engineering).

@inproceedings{64a949fd5d2043c2ac9b342c9fa96d9c,

title = "Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method",

abstract = "The spark plasma sintering (SPS) is a type of electric discharge sintering technique used to consolidate metallic/ceramic powders. In this study, spark plasma sintering was used to fabricate 304 stainless steel with TiN addition. The best parameters that influence the sintering process such as sintering temperature, heating time and pressure were investigated. Results show that by varying the amount of TiN, the sintered properties of the composites could be significantly affected. The relative density decreased with the increment of TiN. Microhardness values vary from 270 to 350 HV0.1.",

author = "Obadele, {Babatunde Abiodun} and Mafafo, {Ramokone Marcia} and Tuckart, {Walter Roberto} and Olubambi, {Peter Apata}",

note = "Publisher Copyright: {\textcopyright} 2021, Springer Nature Singapore Pte Ltd.; 2nd International Conference on Mechanical Engineering Design, ICMechD 2019 ; Conference date: 25-04-2019 Through 26-04-2019",

year = "2021",

doi = "10.1007/978-981-15-4745-4_61",

language = "English",

isbn = "978-981-15-4744-7",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer Nature, Singapore",

pages = "681--689",

editor = "S. Vijayan and Nachiappan Subramanian and K. Sankaranarayanasamy",

booktitle = "Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019",

}

Obadele, BA, Mafafo, RM, Tuckart, WR & Olubambi, PA 2021, Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method. in S Vijayan, N Subramanian & K Sankaranarayanasamy (eds), Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Lecture Notes in Mechanical Engineering, Springer Nature, Singapore, pp. 681-689, 2nd International Conference on Mechanical Engineering Design, ICMechD 2019, Chennai, India, 4/25/19. https://doi.org/10.1007/978-981-15-4745-4_61

Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method. / Obadele, Babatunde Abiodun; Mafafo, Ramokone Marcia; Tuckart, Walter Roberto et al.
Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. ed. / S. Vijayan; Nachiappan Subramanian; K. Sankaranarayanasamy. Springer Nature, Singapore, 2021. p. 681-689 (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method

AU - Obadele, Babatunde Abiodun

AU - Mafafo, Ramokone Marcia

AU - Tuckart, Walter Roberto

AU - Olubambi, Peter Apata

PY - 2021

Y1 - 2021

N2 - The spark plasma sintering (SPS) is a type of electric discharge sintering technique used to consolidate metallic/ceramic powders. In this study, spark plasma sintering was used to fabricate 304 stainless steel with TiN addition. The best parameters that influence the sintering process such as sintering temperature, heating time and pressure were investigated. Results show that by varying the amount of TiN, the sintered properties of the composites could be significantly affected. The relative density decreased with the increment of TiN. Microhardness values vary from 270 to 350 HV0.1.

AB - The spark plasma sintering (SPS) is a type of electric discharge sintering technique used to consolidate metallic/ceramic powders. In this study, spark plasma sintering was used to fabricate 304 stainless steel with TiN addition. The best parameters that influence the sintering process such as sintering temperature, heating time and pressure were investigated. Results show that by varying the amount of TiN, the sintered properties of the composites could be significantly affected. The relative density decreased with the increment of TiN. Microhardness values vary from 270 to 350 HV0.1.

UR - http://www.scopus.com/inward/record.url?scp=85090535790&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85090535790&partnerID=8YFLogxK

U2 - 10.1007/978-981-15-4745-4_61

DO - 10.1007/978-981-15-4745-4_61

M3 - Conference contribution

AN - SCOPUS:85090535790

SN - 978-981-15-4744-7

T3 - Lecture Notes in Mechanical Engineering

SP - 681

EP - 689

BT - Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019

A2 - Vijayan, S.

A2 - Subramanian, Nachiappan

A2 - Sankaranarayanasamy, K.

PB - Springer Nature, Singapore

T2 - 2nd International Conference on Mechanical Engineering Design, ICMechD 2019

Y2 - 25 April 2019 through 26 April 2019

ER -

Obadele BA, Mafafo RM, Tuckart WR, Olubambi PA. Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method. In Vijayan S, Subramanian N, Sankaranarayanasamy K, editors, Trends in Manufacturing and Engineering Management - Select Proceedings of ICMechD 2019. Springer Nature, Singapore. 2021. p. 681-689. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-981-15-4745-4_61

Fabrication of AISI 304 Austenitic Stainless Steels with TiN Addition Using Spark Plasma Sintering Method

Abstract

Publication series

Conference

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this