In-situ carbon dioxide generation for oil recovery: Experimental study of pressure and temperature variations during stoichiometric reaction

Sayavur I. Bakhtiyarov; Geilani M. Panakhov; Azizaga Kh Shakhverdiev; Eldar M. Abbasov; Dennis Siginer

doi:10.1115/IMECE2006-15708

In-situ carbon dioxide generation for oil recovery: Experimental study of pressure and temperature variations during stoichiometric reaction

Sayavur I. Bakhtiyarov, Geilani M. Panakhov, Azizaga Kh Shakhverdiev, Eldar M. Abbasov, Dennis Siginer

Mechanical, Energy & Industrial Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

Experimental simulation of chemical reaction behavior between gas-forming (GF) and carbonate rock components has been conducted. During the reaction an allocation of carbon dioxide and pressure change in PVT bombe were discovered. In these series of experiments a dynamics of pressure and temperature changes during stoichiometric reaction between GF reactant and a carbonate rock was investigated. The GY component was prepared on fresh water (Shollar). As a carbonate rock samples, Karadag rock deposits (Azerbaijan) were used. Researches were conducted at constant temperature T=293 K and at various volumetric ratios of GY reactant and a carbonate rock The quantity of reacting agents was defined from stoichiometric correlation which provided a full neutralization of the tested rock.

Original language	English
Title of host publication	Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division
Publisher	American Society of Mechanical Engineers (ASME)
ISBN (Print)	0791837904, 9780791837900
DOIs	https://doi.org/10.1115/IMECE2006-15708
Publication status	Published - 2006
Event	2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Chicago, IL, United States Duration: Nov 5 2006 → Nov 10 2006

Publication series

Name	American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED
ISSN (Print)	0888-8116

Other

Other	2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006
Country/Territory	United States
City	Chicago, IL
Period	11/5/06 → 11/10/06

All Science Journal Classification (ASJC) codes

General Engineering

Access to Document

10.1115/IMECE2006-15708

Cite this

Bakhtiyarov, S. I., Panakhov, G. M., Shakhverdiev, A. K., Abbasov, E. M., & Siginer, D. (2006). In-situ carbon dioxide generation for oil recovery: Experimental study of pressure and temperature variations during stoichiometric reaction. In Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE2006-15708

Bakhtiyarov, Sayavur I. ; Panakhov, Geilani M. ; Shakhverdiev, Azizaga Kh et al. / In-situ carbon dioxide generation for oil recovery : Experimental study of pressure and temperature variations during stoichiometric reaction. Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division. American Society of Mechanical Engineers (ASME), 2006. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED).

@inproceedings{5e56449ea9dd43c7a13db71f45f63537,

title = "In-situ carbon dioxide generation for oil recovery: Experimental study of pressure and temperature variations during stoichiometric reaction",

abstract = "Experimental simulation of chemical reaction behavior between gas-forming (GF) and carbonate rock components has been conducted. During the reaction an allocation of carbon dioxide and pressure change in PVT bombe were discovered. In these series of experiments a dynamics of pressure and temperature changes during stoichiometric reaction between GF reactant and a carbonate rock was investigated. The GY component was prepared on fresh water (Shollar). As a carbonate rock samples, Karadag rock deposits (Azerbaijan) were used. Researches were conducted at constant temperature T=293 K and at various volumetric ratios of GY reactant and a carbonate rock The quantity of reacting agents was defined from stoichiometric correlation which provided a full neutralization of the tested rock.",

author = "Bakhtiyarov, {Sayavur I.} and Panakhov, {Geilani M.} and Shakhverdiev, {Azizaga Kh} and Abbasov, {Eldar M.} and Dennis Siginer",

year = "2006",

doi = "10.1115/IMECE2006-15708",

language = "English",

isbn = "0791837904",

series = "American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED",

publisher = "American Society of Mechanical Engineers (ASME)",

booktitle = "Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division",

note = "2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 ; Conference date: 05-11-2006 Through 10-11-2006",

}

Bakhtiyarov, SI, Panakhov, GM, Shakhverdiev, AK, Abbasov, EM & Siginer, D 2006, In-situ carbon dioxide generation for oil recovery: Experimental study of pressure and temperature variations during stoichiometric reaction. in Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, American Society of Mechanical Engineers (ASME), 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, Chicago, IL, United States, 11/5/06. https://doi.org/10.1115/IMECE2006-15708

In-situ carbon dioxide generation for oil recovery: Experimental study of pressure and temperature variations during stoichiometric reaction. / Bakhtiyarov, Sayavur I.; Panakhov, Geilani M.; Shakhverdiev, Azizaga Kh et al.
Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division. American Society of Mechanical Engineers (ASME), 2006. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - In-situ carbon dioxide generation for oil recovery

T2 - 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006

AU - Bakhtiyarov, Sayavur I.

AU - Panakhov, Geilani M.

AU - Shakhverdiev, Azizaga Kh

AU - Abbasov, Eldar M.

AU - Siginer, Dennis

PY - 2006

Y1 - 2006

N2 - Experimental simulation of chemical reaction behavior between gas-forming (GF) and carbonate rock components has been conducted. During the reaction an allocation of carbon dioxide and pressure change in PVT bombe were discovered. In these series of experiments a dynamics of pressure and temperature changes during stoichiometric reaction between GF reactant and a carbonate rock was investigated. The GY component was prepared on fresh water (Shollar). As a carbonate rock samples, Karadag rock deposits (Azerbaijan) were used. Researches were conducted at constant temperature T=293 K and at various volumetric ratios of GY reactant and a carbonate rock The quantity of reacting agents was defined from stoichiometric correlation which provided a full neutralization of the tested rock.

AB - Experimental simulation of chemical reaction behavior between gas-forming (GF) and carbonate rock components has been conducted. During the reaction an allocation of carbon dioxide and pressure change in PVT bombe were discovered. In these series of experiments a dynamics of pressure and temperature changes during stoichiometric reaction between GF reactant and a carbonate rock was investigated. The GY component was prepared on fresh water (Shollar). As a carbonate rock samples, Karadag rock deposits (Azerbaijan) were used. Researches were conducted at constant temperature T=293 K and at various volumetric ratios of GY reactant and a carbonate rock The quantity of reacting agents was defined from stoichiometric correlation which provided a full neutralization of the tested rock.

UR - http://www.scopus.com/inward/record.url?scp=84920633440&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84920633440&partnerID=8YFLogxK

U2 - 10.1115/IMECE2006-15708

DO - 10.1115/IMECE2006-15708

M3 - Conference contribution

AN - SCOPUS:84920633440

SN - 0791837904

SN - 9780791837900

T3 - American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED

BT - Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division

PB - American Society of Mechanical Engineers (ASME)

Y2 - 5 November 2006 through 10 November 2006

ER -

Bakhtiyarov SI, Panakhov GM, Shakhverdiev AK, Abbasov EM, Siginer D. In-situ carbon dioxide generation for oil recovery: Experimental study of pressure and temperature variations during stoichiometric reaction. In Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluids Engineering Division. American Society of Mechanical Engineers (ASME). 2006. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED). doi: 10.1115/IMECE2006-15708

In-situ carbon dioxide generation for oil recovery: Experimental study of pressure and temperature variations during stoichiometric reaction

Abstract

Publication series

Other

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this